Skytile® UGR

Introducing our ultra-low glare LED panel

Our Skytile® range has been continually developed since its inception, to track advances in LED technology. Due to developments in performance and increases in light output, glare has become an issue in office environments. To provide a low glare solution, we have redeveloped Skytile® to incorporate the latest in nano-structure diffuser technology, eradicating the issues caused by glare whilst providing an adequate light output.

Skytile UGR LED flat panel
  • Specifically engineered to reduce glare
  • Designed to comply with BS EN 12464-1 lighting of work places
  • Suspension kit and surface mount box available
  • 7 year extended warranty, with 2 year on site support

Ultra efficient 28W LED total wattage

Up to 96 LPCW Lumens per circuit watt

Over 60 % energy saving

The importance of UGR

Providing an ideal workplace environment

LED panels have progressively increased in lumen output over the years, which has made glare an issue in some workplace environments. The requirement to reduce glare has now become an important factor in ensuring the wellbeing of employees.

Skytile® UGR has been developed with market leading nano structure technology that minimises glare and refocuses the light towards the object of illumination. By refocussing the light down, less light is spilled, therefore minimising glare spilled from the sides. In addition to minimising glare the nano structure technology also ensures only the required amount of light is used, consequently saving on energy that would have otherwise been wasted from light spill.

  • UGR Explained Graphic – Standard LED Panel
    1

    Wide beam angle

    Traditional LED panels typically output light at a 120 beam angle.

    2

    Polar curve

    Area of highest intensity light.

    3

    Direct glare

    The wide beam emits glare into the eyeline of neighbouring colleagues.

  • UGR Explained Graphic – Skytile UGR LED Panel
    1

    Narrow beam angle

    Skytile UGR's innovative nano structure outputs light at a 90 beam angle.

    2

    Polar curve

    Area of highest intensity light.

    3

    Reduced glare

    Due to the reduced beam angle of Skytile UGR, glare is omitted from colleague’s eyelines.

Engineered to reduce glare

Market leading skytile construction

Skytile UGR® has been developed with market leading nano-structure technology that minimises glare and refocuses the light towards the object of illumination. By refocussing the light down, less light is spilled, therefore minimising glare spilled from the sides. In addition to minimising glare the nano structure technology also ensures only the required amount of light is used, consequently saving on energy that would have otherwise been wasted from light spill.

Innovative Skytile UGR light transmitter

Innovative nano structure light transmitter

The 'nano technology structure' narrows the overall beam angle of the luminaire, which results in a reduction of high angle light and lower UGR values.

Innovative Skytile UGR light transmitter

Two colour selectable plug & play connector

The innovative plug and play connector allows the electrician to simply select the required colour temperature, either 4000 or 4700K, during installation.

Skytile UGR LED flat panel cutaway
1

Exceptionally thin & lightweight structure

The ultra-slim aluminium construction aligns the LED chips with the light transmitter. The JCC Skytile® is lightweight and easy to handle with maximum strength and durability.

2

Light reflector

The high quality mild steel 'light reflector' ensures that all light is reflected back into the light transmitter.

3

Low glare polycarbonate light diffuser

The polycarbonate diffuser provides an even light distribution to the room and will not drip hot plastic in the event of a fire, providing extra safety assurance in the workplace.

4

Innovative light transmitter

The surface properties of the 'light transmitter' ensures light moves evenly throughout the fitting.

The 'light pixels' covered base transmits all the light into the polycarbonate diffuser.

5

Advanced LED in two colour temperatures

Light is projected from the high specification LED chips directly into the light transmitter. Skytile® LED technology provides maximum light with minimum energy consumption.

A choice of either 4000K or 4700K colour temperature can be selected using the plug and play connector.

Designed to comply with BS EN 12464-1

For assurance and peace of mind

Skytile® UGR has been specifically engineered to reduce glare and tested to comply with British Standards guidelines for the lighting of workplaces.

Market leading Skytile® features

Consistent and reliable performance

Skytile® UGR incorporates all the features and benefits of our original Skytile® panel, one of the first LED panels to provide the market with consistent and reliable performance that exceeded traditional fluorescent fittings.

Light Distribution Icon

Smooth even light distribution

The light transmitter, diffuser and reflector eliminate shadowing and hotspots. This ensures crisp, smooth light distribution across the working plane, resulting in a more pleasing working environment and ambient light.

IP44 Icon

IP44 Protection as standard

Skytile® is IP44 protected as standard, ensuring the internals of the fitting are protected against dust and moisture. Not only does this ensure the fitting lasts longer, but it also makes cleaning quick and easy with its wipeable surface.

Construction Icon

High quality construction

Skytile® features an exceptionally thin and light weight structure, whilst providing maximum strength and durability, and market leading light uniformity through innovative engineering and the very latest chip technology.

Accessories Icon

Accessories available

A range of accessories are available to ensure versatility across applications, including microwave presence detector to ensure areas are only lit when occupied, and surface mounting box for installation onto solid ceilings.

Find out more

Covered by our outstanding 7 year warranty

Including 2 years on-site support

The Skytile® range is covered by our industry leading 7 year warranty. That includes 2 year on-site support, and our industry-leading 5 year commercial warranty. During the 2 Year on-site support, we’ll replace or repair any of your Skytile® fittings completely free of charge.

Register warranty

How does it work?

Skytile® products are covered by an initial 2 year on-site warranty, from date of purchase (UK installations only). At the end of the 2 years, JCC will offer an extended 5 year replacement, product only, warranty. This relates to all new and existing branch stock.

Terms & conditions

Installation made easy

Saving you time and money

Step One

Remove the ceiling tile and move the Skytile® UGR fitting into the ceiling void.

Step Two

Ensuring the power supply is off, wire the LED driver to the mains supply.

Step Three

Move the panel into position within the ceiling.

Be the first to hear about new products

Receive product updates and offers by email